Semi-auto Corrugated Flexographic Printing Slotting Die Cutting machine

Semi-auto Corrugated Flexographic Printing Slotting Die Cutting machine

Main configuration:

1. Adopt chain manual feed the paper

2. Automatic return to zero device, can set the production number, finish the order can be warning by the belt.

3. Steel and knurling roll feed the paper together, avoid the cardboard slip, and improve the precision of feeding paper.

Main Technology Parameter

Function and Characteristics:

 

*Feeding Unit

n Semi-automatic chain paper feed,and side check plate positioning to ensure accurate paper feed.

n There are four gear chain bars, and each file has three cross-stack cardboard.

n Abrasion resistance materials as the support of the bottom of chains, fast running, low noise and low chain abrasion resistance.  

n Main motor placed under the working table.

n Equipped with block paper steel bar to ensure the easy feeding of the bend cardboard.

n Feeding error±1.5mm

 

*Printing Unit

n Printing roller, paper feeding roller, pressure roller, all the surfaces grinding, hard chromium plating.

n Adopt planet style electrical adjustment of 360 degrees whatever operating and stopping, quickly

and accurately.

n Motorized shift and pneumatic locking up of printing units.

n Inking roller can be detached from printing plate automatically to avoid damage the printing plate.

n Inking roller equipped idling running device to prevent ink from being dried when machine stop.

n Pneumatic lifting and down the anilox roller, auto ink distributing.

n With Pneumatic diaphragm pump to supply ink.

n Main transmission gears are made by 45#steel after high frequency quenching.

n Drive part adopts spray lubricating system, improve the precision and serve life of machine.

n Main gear adopts free-key connection, can long-time keep the printing accuracy.

n Manual adjustment of the printing roll axial position 15mm.

n Anilox and rubber roll drive motor: 0.75 kw

n Phase adjusting motor: 0.37 kw.

n Printing precision±0.50mm(when the paper board is plane and smooth).

Auto count device properly controls production volume.

 

 *Slotting Unit

n The slotting knives pedestal can be worm-type adjustment according to the thickness of card board. ( Three & Five layer only).

n The slitting knives pedestal can be worm-type adjustment according to the thickness of card board. ( Three & Five layer only).

n The back slotting knife (Height of the box) Four knives adjustment synchronous, easy working.

n The main gear adopts free key connection can maintain the long time slotting accuracy.

n Motorized shift and pneumatic locking.

n Electric adjustment Printing phase and slotting position.

n 7mm alloy steel slotting knives with indent heat treatment to enable grinding teeth sharp edge.

n Slotting adjustment motor 0.37kw

n Slotting airframe motor-driven 0.55kw

n Slotting Precision more or less 1.5mm.

 

*Die Cutting Unit

n Glue roller line speed auto repair device, prolong the service life of rubber.

n The rubber roller adopts horizontal automatic position move left and right. The movement distance is 40mm. Prolong the service life of rubber.

n Automatic grinding roller function, prolong the service life of rubber.

n Adopts high quality Taiwan durable rubber

n Roller made from cast steel grinding, wall thickness is 30 mm.

n Die-cutting roller pneumatic manual or automatic control, die cutting roller lift cutting when feeding paper, down when stopping feeding paper avoid damage the rubber.

n The phase of die cutting position electric adjust

If you are also interested in the following product, please click the link

1. Q: Are you a manufacturer, trading company or a third party?

A: We are a manufacturer, located in Mahai industrial area south of Dongguang county, Hebei province, China. Warmly welcome to visit our company.

2. Q: How does your factory do regarding quality controlling?

A: 1) All raw material we used are environmental-friendly

   2) Skillful workers care every details in handling the producing and packing process

   3) Quality control department are specially responsible for quality in each process

We have been kept providing high quality products by introducing advanced technologies for over 20 years, and our products are also widely exported to many different countries including Russia, the Middle East, Africa, Southeast Asia, EU, etc, which earned us a high reputation among the customers.

3. Q: What is the payment terms?

A: T/T, it is 30% deposit due at placing order and 70% balance due before loading.

4. Q: How about the after-sale service?

A: 1) TM online for 24 hours, also contact by email, skype, MSN, whatsapp, etc.

   2) To solve the problems with videos/pictures.

   3) One year warranty for spare parts change.

Contact for professional service. Contact Us