Double Facer Machine for 5ply corrugated cardboard production line
Product Description
WJ150-Double Facer For 5ply corrugated cardboard line
| No. | Name | Qty | Feature |
| 1 | Hot plate | 1 | --Main frame is 300 GB channel steel --Hot plate 600mm 14pcs |
| 2 | Cooling part | 1 | --5M cooling section --The upper and lower belt correct automatically --Temperature display |
| 3 | Main drive | 1 | --Main drive Frequency motor drive |
| 4 | High speed belt | 1 | --Good quality high speed cotton woven belt |
1.Machine Description:
* Corrugated paper enter into the double facer hot parts with heating and molding after pasted glue, and become board after cooling
2.Machine Function:
* Hot Plates width 520mm and 10 pics,cooling parts 4m
* Heat conductive pipe of hot plates control the temperature segmented,with the temperature display
* The inside of the hot plate is partition isolation structure,making the steam flow in S-shaped direction, and the separation function of steam and water is obvious,then improves the steam usage efficiency
* Up belt adopt double cylinder S type tension device,down belt manual tension device（small amount adjust）
* Drive rollers’ surface is wrapped by rubber with middle height,to make sure the board output smoothly
* Main drive motor: Variable frequency motor, high force when low speed start, high speed adjusting range, steady to use,easy to mend
* The electrical components adopt international famous brands, working stably and reliable
3.Machine Technical Parameter
| Working Width | 1600mm-2200mm |
| Steam Pressure | 0.8-1.3Mpa |
| Air Pressure | 0.6-0.9Mpa |
| Up Drive Roller | Φ525mm |
| Down Drive Roller | Φ525mm |
Front Driven Belt Roller | Φ320mm |
Back Shaping Driven Belt Roller （Down Belt Tension ) | Φ215mm |
| Shaping Holder Roller | Φ86mm |
| Note: All the surfaces of the roller are ground and then chromed plated | |