BA Semi-automatic Printing Slotting Die Cutting Machine

Feeding unit

nChain table artificial feeding paper

nThere are four gear chain bars, and each file has three cross-stack cardboard.

nAbrasion resistance materials as the support of the bottom of chains, fast running, low noise .

nEquipped with block paper steel bar to ensure the easy feeding of the bend cardboard.

   

Printing unit

n  Printing roller, paper feeding roller, pressure roller adopt high quality thick wall seamless steel tube,all the surfaces grinding, hard chromium plating。

n  High quality steel 200mesh or 200mesh combination, can print 45line flexographic plate.

n  Good wear resisting, oil resistance, acid-proof alkali rubber, design medium to high grinding, ink transfer effect is good.

n  The printing roller pressure adjust by the gear adjustment without clearance, the printing roller pressure can reach the best printing state.

n  360 degree electric phase, adopt CPU computer digital control device, according to the error input the data, it can automatic adjust phase, printing electric power adjusting mechanism adopt planetary gears working,  at non-stop condition, can 360degree random adjust,  the axial adjustment by manual, adjustable distance is 30mm, the machine turns or stop can be operated.

n  Motorized shift and pneumatic locking up of printing units.

n Inking roller can be detached from printing plate automatically to avoid damage the printing plate.

n  Inking roller equipped idling running device to prevent ink from being dried when machine stop.

n  Pneumatic lifting and down the anilox roller, auto ink distributing.

Slotting unit

n  The slotting knives pedestal can be worm-type adjustment according to the thickness of card board. ( Three & Five layer only).

n  The slitting knives pedestal can be worm-type adjustment according to the thickness of card board. ( Three & Five layer only).

n  The back slotting knife (Height of the box) Four knives adjustment synchronous, easy working.

n  7mm alloy steel slotting knives with indent heat treatment to enable grinding teeth sharp edge.

Main Technology Parameter: